KE-493G(45) | 智能端头封边机，四刀高速跟踪快又准！
2023-12-12 来自: 兰州九力机电设备有限责任公司 浏览次数:167
双色PUR上熔胶+快速上熔胶
Pre-melting+PUR gluing system
快速切换不同种类的胶水，操作方便。
Quick change with various type of glue, easy to operate.
快换式上熔胶，拆换便利、快捷胶锅液位高精仪器监测，自动预熔、自动抽胶粒。
Quick-change glue pot and glue level sensor equipped, EVA glue pre-melts and automatically applies.
独立控制送带机构
Independent-control Tape-feeder
送带。
Efficient&Accurate in Tape feeding.
双修边机构
Trimming Units
将突出于木板上下表面多余边带切除，使封边带上下边缘与木板的上下表面平齐。
Trim excess edge off the panel top and bottom, to have a level and smooth edging results.
高速跟踪机构
High Speed Corner-rounding
配备4组高频电机，圆角仿形修边快速准，可实现多种倒角修边工艺。
Equips with 4 trimming motors, fast and stable in corner profiling.
平刮边机构
Flat Scraping Unit
去除封边带与板材之间的多余胶线，除尘效果好，提高封边质量。
Removes residual glue line for a better edging results.
压梁自动定位
Pressure beam with auto adjustment
快速切换加工不同厚度的板件，减少调机时间，提高其效率。
Precise & quick adjustment according to workpiece thickness, reducing adjustment time and improving efficiency.
辅助送板装置
Feeding supporter
送板操作方便平稳，有效防止板材端头封边偏位，确保封边质量。
Stable feeding with small pieces, effectively prevent workpiece out of guide, and ensure for a best edging results.
预铣机构
Pre-milling Unit
标配40mm铣刀（选配65mm），采用双铣刀对开料产生的波纹痕迹、毛刺或不垂直等现象进行修饰，使封边条与板材的贴合更加紧密，整体性和美观度更佳。
Standard with 40T pre-milling cutter, to trim off the defects of panel surface, and thus to achieve a close sticking and a better edge results.
前后齐头
End-cutting unit
通过精密的直线导轨运动，快速切断板材前后多余边带,确保切断面平整光滑。
Motions along the precision linear guides, quickly cut off the excess edge at front and rear of the panel to ensure a smooth cut surface.
金刚石修边刀
Diamond Trimming Cutters
高硬度、高耐磨性。
High-hardness, high wear-resistance.
双刮边机构
Scraping unit
消除修边非直线运动切削过程引起的波纹痕迹，使板材上下部分更加光滑整洁。
Trim off the tools marks, ensuring the best edging quality.
双固定抛光机构
Buffing units
清除板件上下面的余胶和碎屑。
Clean excess glue and chips off the panel top and bottom.
